Track circuit detectors - Trainz
2019年10月7日 · The green line should then indicate the extent of the Track Circuit Section. If the track is occupied by any rolling stock or locomotive the line will turn red. On a siding or terminus platform the buffer stop acts as a second Track Circuit Insulator. If it is a through station then you would need two Track Circuit Insulators, one at each end ...
Track Circuits - Trainz
2018年9月17日 · Lets say train 1 is west bound and train 2 is east bound. Traveling towards each other there is a section of track where its single main. Train 1 gets there first and proceeds west. Train 2 would have to wait in the siding until train 1 clears the circuit there by clearing their "track warrant". Then train 2 may proceed east.
Track Circuits?? - Trainz
2020年1月18日 · The track Circuit Detector is the bit that checks if the section is occupied and must have a unique name. I use them in conjunction with the Enhanced Interlocking Towers by author "pguy" to find empty tracks in stations or yards or to control single line sections to prevent cornfield meets.
Track Circuit Insulator and Detector? What's their purpose?
2023年9月5日 · Hi As mentioned above these are used to detect if a section is occupied by another consist. When setting them up make sure that the first insulator is positioned in front of the final signal in the approach path (i.e. it is contained within the path).
Yet Another Interlocking and Track Circuit thread | Trainz
2020年5月8日 · In the accompanying badly drawn track diagram, I'm focusing primarily how to protect the 2-way portion of the branch from cornfield meets while also allowing trains to enter and work the non-signaled industry siding without impeding traffic for the entire time they're in there (Trains working this siding would come north from EIT 2, pull in and ...
Circuit blocks and the latest update. - Trainz
2023年11月19日 · The default values for a new track circuit detector are traffic type = any and block type = branch line. As before, the track circuit detector will create a track circuit block with the same traffic type and block type properties, expanding as before along the tracks from the track circuit detector until it reaches a track insulator.
Questions on Interlocking Towers and Single Track ATC
2018年10月27日 · This means that once a consist has taken control of that path no other consist can set an opposite path through it, therefore no cornfield meets. You will also need to set up Track Circuit Blocks for the passing sections as you don't want a second consist following into the section if the next passing loop is occupied.
Passing on single track - Trainz
2023年10月24日 · Use an exclusive name on the station track. In the track objects look for asset C+Note or download it. Place it on the station track and name it "AT1", or "AT2". A = station and 1,2 = the track selection (it has no function except to inform you of the name you used). Extend the path through the station in both directions.
Signals overlaps - Trainz
2012年6月25日 · My signals are simple - only using config.txt file (no gs file) But they behave as if overlap track circuit was 100 metres long or even more... I have included the tag "overlap 1" and then "overlap 0.0001" tag but the signal doesn't switch from danger at the while when the block becomes unoccupied but some 40 metres longer...
Typical UK signalling distances - Trainz
2012年1月29日 · Where the full braking distance cannot be achieved at those locations train speed is contolled by signalling restrictions such as, if a signal cannot be cleared the signal next in rear will not clear until the berth track circuit of that signal has been occupied for 30 seconds. 3 aspect signals are placed at full braking distance and 4 aspect ...